Description:

A. Work Functions 1) Supplier services shall include, but not be limited to, a) Equipment installation, grounding (Verizon supplied), labeling, and removal/migration work. b) Cable installation, mining, identifying, labeling, and testing. c) Test/ turn up procedures including BERT, RFC, and enhanced RFC testing of Fiber Optics or Copper OSP circuits from Service Providers. d) Assist with Data Service Operations Maintenance tickets as directed by DCIM or other Verizon authorized representative. e) Any such other related Services as which may be ordered by Verizon including RMA staging. f) Supplier shall have onsite technicians skilled and knowledgeable in DC powered equipment. g) Supplier shall have onsite technicians skilled and knowledgeable in test, trace, and extend circuits. 2) All work performed by Supplier shall be performed under a NSS/NSR ticket provided by DCIM or other Verizon authorized representative. 3) All work performed by Supplier shall be documented within the Verizon tools when appropriate, such as: a) Remedy (NSS/NSR) b) Network Change Control (Kirke Request) c) MOP d) Tool for cable and equipment power and space management systems (IFP and/or Nlyte or similar asset repository). 4) All NSS/NSR tickets shall be completed within ten (10) days unless otherwise agreed to and communicated by Verizon. 5) Supplier shall perform cable, equipment, and cabinet installation Services in accordance with Verizon NNO Standards, which shall be made available upon request. 6) Supplier shall use ESD protection at all times when working on card or equipment replacement. 7) Installation Services shall include testing as described in Section B, Installation Expectations below. 8) Supplier is required to provide all test equipment necessary to complete the installation Services. 9) Prior to the start of any work in an NEC, a Kirke Request and a MOP must be issued and approved in accordance with the “Network Change Control Management Directive” number ME-ALL-DI-15-0000. Supplier vendor must have the Kirke Request number with them during any work. 10) As required in ME-ALL-DI-15-0000, all work activities performed in the NEC shall be performed during maintenance window hours (11:00 PM to 6:00 AM local time) unless specified otherwise by Verizon representatives. a) Supplier shall only open cabinets or work on live equipment during maintenance window hours. b) Prep work (non-network impacting) is allowed at any time. c) Rough-in is allowed at 11:00 PM d) Clean up can be completed between 5:00 AM and 6:00 AM e) Supplier shall lock DCS bays after work is completed. B. Installation Expectations 1) Supplier shall provide labeling material to label all cables and equipment as per Verizon Wireless NNO Standards. a) Labeling shall not lag installation by more than 3 days, and requires temporary tagging to ensure the correct labeling is applied. b) Labeling shall include Supplier initials. c) All cable labels must include source/destination location and patch panel location. d) NSRs cannot be closed until Supplier has completed the labeling. e) Label needs to have complete CLLI code. 2) Supplier to follow fiber and copper cabling quality standards outlined in Section D, Testing Requirements below. 3) Supplier will only work off the Cabling Cut Sheet from DCIM, or other Verizon authorized representative. 4) Supplier shall not energize or de-energize live equipment without email confirmation. 5) Supplier shall install and connect cabling from each interface(s) identified in the cabling cut sheet unless given different direction from DCIM, or other Verizon authorized representative. 6) If Supplier finds missing, incorrect, or issues with the data in the Cabling Cut Sheet, Supplier shall notify the DCIM team within 24 hours of receipt of receiving the Cabling Cut Sheet. 7) If a job requires custom cabling or the stock of cable can’t support a Cabling Cut Sheet, then Supplier shall notify DCIM within 24 hours of receipt of receiving the Cabling Cut Sheet. Supplier shall create a BOM request for the cabling within twelve (12) hours of notifying DCIM.

Skills:

data center, cable, install, fiber, copper, excel data entry, Cable, Cat5, Cabling, Telecommunication, Cable tech

Top Skills Details:

data center, cable, install, fiber, copper,excel data entry

Additional Skills & Qualifications:

Candidate should have experience in a Data Center environment, be able to speak with higher level manager at VzW and Ace, able to work with vendors and be calm under pressure.

Experience Level:

Entry Level

About TEKsystems:

We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.